Student Projects  Supervised at the Technical University of Kenya(2018 to now)

Consultation Time: Friday 1000-1500hrs
Venue: E Block, Room E8 and Zoom

Project Report Format and Guidelines

Project Report Format:

2024 Version:

Project Report_Template 2024

2023 Version:

Project Report_Template

2022 Version:

Project Report Format_Sept 2022_v5

2021 Version:

Project Report Format_Sept 2021_v1

2019-2020 Version:

Project Report Format Customised_v1-TUK

Supervisor Consultation Form:

F5 Project Supervisor Consultation Form_v3 – 20-01-24

Assessment Criteria

Demo – Oral

  1. Novelty of Concept
  2. Workability
  3. Construction Aesthetics
  4. Quality of Presentation (organization, audibility, accuracy of language)
  5. Extent of Supervisor Consultation

Report – Document

  1. Quality of Title Page
  2. Quality of Acknowledgement
  3. Quality of Content Pages
  4. Quality of Abstract
  5. Quality of Problem Statement
  6. Quality of Proposed Solution
  7. Quality of Objectives (SMART)
  8. Quality of Block Diagram
  9. Quality of Specifications
  10. Quality of Analysis and Literature Review
  11. Quality of Design
  12. Quality of Construction and Testing
  13. Quality of Results and Discussion
  14. Quality of Conclusions
  15. Quality of Recommendations
  16. Quality of Appendices
  17. Quality of Referencing
  18. Organization of Document

Where to buy project components? Electronic/Electrical Shops in Kenya

Nerokas Online Store:
4th Floor, Emko Plaza, Garissa Road Thika, Kenya

Pixel Electric Engineering Ltd:
Nakuru – Kabarak Road,Pixel Building Block,Olive Inn, Nakuru,Nakuru County, Kenya

Masimo Electronics:
Address: Junction of Luthuli, Three Ways Building, River Rd, Nairobi

KTechnics Systems Co.Ltd:
2nd Floor shop C-6, Along Munyu Road Off Luthuli Avenue Opposite former Kenya Mpya bus stage.

2023 Student Projects Supervised
2022 Student Projects Supervised
  1. Automatic Solar Panel Cleaner by MAINGI NDINDA
  2. Audio Amplifier with a Back-Up Battery by MUTHENYA PETRONILLA MBITHE
  3. GSM Based Prepaid Energy Meter by AKINYI ELIZABETH OKELLO
  4. Electricity Generation Using Noise by OCHIENG PAMELA ANYANGO
  5. Generating Electricity Using Radio Frequency Waves by ATIENO EUNICE
  6. Smart Underground Cable Fault Locator by MAINA KAMAU SIMON
  7. Remote Load Monitoring and Control System by DENIS KYAILA MUTIE
2021 Student Projects Supervised
  1. Intelligent Temperature Regulator System by Bernard John Sungura.
  2. Design and Construction of an Automatic LPG leak Control System by Ricky Okanga.
  3. Design and Construction of a Data Center Humidity Monitoring  System by Anthony Kiambi Githae.
  4. Design and Construction of a Carbon Monoxide and Noise Level Monitoring System by Margaret Wanjiru.
  5. DC and Stepper Motor Interface by Musau Kioko
  6. Transformerless Step-Down Power Supply System by Kipkurui Dankan
  7. Power Monitoring and Control System by Mercy Jebet Kipkoti
  8. Automatic Transformer Fuse Failure Detector by Kiptoo K. Hosea
  9. Design and Construction of Transformer Vandalism Monitoring System by Janiffer N. Gatu
  10. Automatic Wireless Power Trip-During Gas Leakage by Bivon Saisi Nyong’a

 

2020 Student Projects Supervised
  1. Solar Powered Led Street Lighting with Auto Intensity Control by Jacob Kipkogei Kangogo.
  2. IOT Industry Automation by Richard Lander Okello.
  3. Solar Powered Automatic Time-based Irrigation by Bridget Kinara.
  4. Car Reverse Parking Sensor System by Margaret Wanjiru.
  5. Design of an Intelligent Car Overloading System with GSM by Nelly N. Ndemo.
  6. Brooder Temperature Regulator with GSM Remote Failure Alert by Christopher Muriuki Githinji.
2019 Student Projects Supervised
  1. Electronic eye controlled system by BRIAN ONDITI ODHIAMBO
  2. Intelligent vehicle hazard light system by DENIES NDUATI MWANGI
  3. Room occupancy monitoring and counting device by ROGERS ODUOR OTIENO
  4. Automatic water level controller for both overhead and underground tanks by KENNETH YUKE OWINO
  5. Sun’s rays direction tracker for a solar panel by VICTOR KIMEU MUTINDI
  6. Microcontroller based GSM remote monitoring substation system by OYAYA VICTOR WELLINGTONE
  7. Design and construction of smart load monitor by Geoffrey Koech
  8. Automatic room temperature control system by ARNOLD AMESA WAFULA
2018 Student Projects Supervised
  1. Wireless mobile charger pad circuit using inductive coupling by MARIA MUSYOKA
  2. Design and construction of a voltage regulator by JANE MUSILI
Share This